Request Quote
John Deere 2430 chisel plow
Tillage
- Hydraulically-adjusted knife-edge rolling basket with internal scraper
- TruSet™ Active improves tillage depth accuracy and makes adjustments for varying field conditions, such as tire sink in soft soils or residue build up on tires, with no need for operator input
- Radial tires improve flotation and transport
- New rear hitch adjusts side-to-side for easier hookups
Features
Overview
With short windows of time to perform tillage operations, TruSet provides significant productivity improvements as operators can adjust the tool with just the push of a button, maximizing acres covered per day. By responding to conditions as they change throughout the field, TruSet Active enables operators to generate a higher-quality tillage performance within the first pass.
Using a GreenStar™ display, an operator sees real-time data for a variety of feature settings, ensuring confidence in desired tillage outcomes. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions, which allows for even quicker implement adjustments.
Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the tool are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.
John Deere has expanded TruSet features to bring even more functionality into the cab:
- Active depth, and basket pressure and raise
- Gang angle
- Hydraulic active stabilizer wheels
- Hydraulic wing control
- Hydraulic fore-aft control
TruSet features and packages
TruSet Tillage features a variety of technology features and packages. With either the Select or Premium package, you can elevate your experience with some or full control of your tillage tool from the cab at your fingertips. The following table outlines each TruSet offering specific to the implement model. For additional information on each feature, see the details after the table.
TruSet Functions | ||||||||
Models: | Set-point depth | Active depth | Basket pressure | Side-to-side leveling | Gang angle | Fore-aft | Wing down pressure | Stabilizer wheels |
2230 Floating Hitch Field Cultivator | --- | Select** | Select | Premium | --- | --- | --- | --- |
2230 Level-Lift™ Field Cultivator | --- | Select** | Select | --- | --- | --- | --- | --- |
2330 Mulch Finisher | --- | Select** | Select | Premium** | --- | Premium** | --- | --- |
2630 Series Disks | --- | Select** | Select | Premium | --- | Premium** | --- | Option |
2633VT Vertical Tillage | --- | Select** | Select | Premium | --- | Premium** | --- | --- |
2660VT Vertical Tillage 1-Section 4.27 m (14 ft) | --- | Select** | Select | Premium | Premium | Premium | --- | --- |
2660VT Vertical Tillage 3-Section 7.8, 9.2, 10.1 m (25.5, 30.3, 31.10 ft) | --- | Select** | Select | Premium | Premium | Premium | Premium | Option |
2660VT Vertical Tillage 5-Section 14.1, 15.1 m (43.6, 49.6 ft) | --- | Select** | Select | --- | Premium | Premium | --- | Option |
2680H High-Speed Disk* | In base | --- | --- | --- | --- | --- | --- | --- |
2430C | --- | Select** | --- | Premium | --- | --- | --- | --- |
2430 Drawn Chisel Plow | --- | Select** | Select | Premium | --- | --- | --- | --- |
*Currently not available in feature packaging
**New feature
NOTE: All Select package features are also included in the Premium package.
Active depth (Select and Premium package)
- With TruSet Active, the tillage tool automatically adjusts and keeps the desired depth even through changing field conditions, such as tire sink in soft soils or mud buildup in damp and sticky conditions.
- This is possible using an ultrasonic sensor that measures the distance from the mainframe to the soil as the implement travels through the field.
Basket pressure and raise (Select and Premium package)
- Integrated TruSet Tillage technology enables the operator to adjust their down pressure on the hydraulic rolling baskets while on the go to respond to changing field conditions such as varying soils, heavier residue, and moisture.
- Easily raise your baskets with one touch to avoid certain areas of the field, whether you are wanting to check the tillage tool with the baskets up or avoid going through a wet spot in the field. Once you’re through the area and ready to lower the baskets, simply press the basket lower to resume your desired basket pressure.
Side-to-side leveling (Premium package)
- Operators have the option to enhance the TruSet Tillage system with individual section leveling functionality. TruSet side-to-side is available as a field-installed option that can be ordered with the tillage tool or through aftermarket parts. The base TruSet Tillage system can also be upgraded to TruSet side-to-side with a conversion kit.
Gang angle (Premium package)
- With TruSet gang angle control, operators can adjust the gang angle on the go right from the cab. Adjusting the gang angle from 0 to 12 degrees provides more horizontal soil movement. The more aggressive the gang angle, the more soil mixing and burying of residue. Operators can also remove light ruts, tracks, and weeds at the most aggressive gang angle.
Fore-aft (Premium package)
- TruSet hydraulic fore-aft control enables operators to level the implement from the comfort of the tractor cab.
Wing down pressure (Premium package)
- TruSet hydraulic wing control transfers the weight from the mainframe to the wings to improve penetration in hard or heavy soils. In high-speed, shallow-depth tillage operations, maintaining a consistent depth across the tillage tool is critical to the consistency of the seedbed.
NOTE: TruSet hydraulic wing control pressure is only offered on three-section models.
Stabilizer wheels (additional factory option)
- Getting the best field performance is easier with TruSet Active hydraulic stabilizer wheels. Choose the option to easily adjust the depth of the stabilizer wheels from the cab to match the overall depth as changes are made. This feature replaces the mechanical linkage on stabilizer wheels with a hydraulic cylinder.
NOTE: Stabilizer wheels are not offered on one-section models.
TruSet documentation
With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature allows producers to capture and analyze the tillage pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.
Operators can document data for the depth of their tillage tool along with rolling basket down pressure. By creating an as-applied map based off global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.
Additionally, the TELUS Agronomy Prescription Creator company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the tillage tools. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth and pressure settings for optimum agronomic results.
TELUS Agronomy Prescription Creator is a trademark of TELUS Agriculture and Consumer Goods
Radial tires reduce compaction points while operating in the field and minimize downtime caused by tire failures both in the field and during transportation. Radial mainframe tires now come in base equipment and can be an option on the wings. With a wider tire plate and lower inflation pressure, radial tires have a larger contact area with the ground to help minimize compaction.
The 2430 offers different rear attachment options to meet the unique agronomic needs of each producer. Producers have a choice of two rear attachments on the 2430 Chisel Plow.
Knife-edge hydraulic rolling basket with internal basket scraper
The knife-edge rolling basket for the 2430 Chisel Plow is made of hardened steel and handles rock strikes and adverse conditions well. The ease of down pressure adjustability allows the tool to adapt to changing field conditions. The internal basket scraper allows for a uniform field finish in wet conditions because baskets do not need to be raised out of the ground to avoid plugging; they can remain in the ground 100 percent of the time.
The John Deere 2430 Chisel Plow offers an active hydraulic rolling basket that gives the operator wide-ranging adjustability for a variety of conditions. The drawbars and rolling basket on the rear harrow are built with strength in mind for the demanding fall conditions. The system was designed to have the ability to run the rolling baskets in three different positions to finish and level the soil:
- Raised: allows the operator to raise the rolling baskets in harsh, muddy conditions
- Float: allows the operator to float the rolling baskets to lightly fluff soil
- Apply down pressure: allows the operator to adjust the basket pressure to provide consistent contact with the ground, provides a firm seedbed, and shatters root balls
The hydraulic rolling basket is offered with the knife-edge basket, which is the best for heavier, wet soil.
240 Coil-Tine Chisel Plow Harrow
The 240 Coil-Tine Chisel Plow Harrow is designed specifically for the 2430 Chisel Plows. Harrow performance has grown increasingly important over the last few years as soil profile finish and residue-handling capability are on the top of the list for producers. Both attributes are standouts on this heavy harrow.
The 2430 Chisel Plow is available in rigid and rigid fold, three-section folding, and five-section folding frame models.
Models |
Type of fold |
Standards |
Rigid |
Non-fold or horizontal fold |
TruPosition™ or |
Flexible |
Three-section |
TruPosition or |
Flexible |
Five-section |
TruPosition |
Rigid configurations |
||
Working widths | Centerframe size | Transport width |
3.35 m to 4.47 m (11 ft to 14 ft, 8 in.) | 3.66 m (12 ft) non-folding | 3.35 m to 4.9 m (11 ft to 16 ft) |
4.3 m to 5.4 m (14 ft to 17 ft, 8 in.) | 4.6 m (15 ft) non-folding | |
5.3 m to 6.4 m (17.5 ft to 21 ft) | 3.66 m (12 ft) folding |
Three-section configurations | ||
Working widths | Centerframe size | Transport width |
6.4 m to 7.5 m (21 ft to 24 ft, 7 in.) | 3.05 m (10 ft) | 4.8 m (15.3 ft) |
7.6 m to 8.7 m (25 ft to 28 ft, 8 in.) | ||
7.04 m to 7.8 m (23 ft, 1 in. to 25 ft, 9 in.) | 3.66 m (12 ft) | 5.5 m (17.58 ft) |
8.2 m to 9.3 m (27 ft to 30 ft, 8 in.) | ||
9.2 m to 10.3 m (30 ft, 4 in. to 33 ft, 8 in.) | ||
10.7 m to 11.35 m (35 ft to 37 ft, 3 in.) | ||
9.14 m to 9.9 m (30 ft to 32 ft, 3 in.) | 4.6 m (15 ft) | 6.375 m (20.58 ft) |
10.4 m to 11.6 m (34 ft, 2 in. to 38 ft, 2 in.) | ||
12.2 m to 12.9 m (40 ft to 42 ft, 3 in.) |
Five-section configurations | ||
Working widths | Centerframe size | Transport width |
13.4 m to 14.2 m (44 ft to 46 ft, 8 in.) | 3.66 m (12 ft) | 5.3 m (17.25 ft) |
14.2 m to 15.2 m (46 ft, 9 in. to 50 ft) | ||
15.85 m to 16.7 m (52 ft to 54 ft, 8 in.) | ||
14.3 m to 15.2 m (46 ft, 11 in. to 49 ft, 10 in.) | 4.6 m (15 ft) | 6.1 m (20 ft) |
16.8 m to 17.6 m (55 ft to 57 ft, 10 in.) | ||
18.3 m to 19.2 m (60 ft, 2 in. to 63 ft) |
NOTE: Tru-Depth standards are available through 10 m (33 ft) only.
The 2430 Chisel Plow has excellent residue-handling capability in primary tillage at all residue levels.
Typical percentages of residue cover remaining from the 2430 are listed in the following table. The percentages do not consider variables such as the condition of the residue, speed, and soil type.
For machines with 305-mm (12-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
102-mm x 368-mm (4-in. x 14.5-in.) shovel |
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
406-mm (16-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
|
100 |
80 |
70 |
100 | 80 |
70 |
100 |
80 |
70 |
90 |
72 |
65 |
90 |
72 |
65 |
90 |
72 |
65 |
80 |
65 |
56 |
80 |
65 |
56 |
80 |
65 |
56 |
70 |
55 |
50 |
70 |
55 |
50 |
70 |
55 |
50 |
60 |
50 |
42 |
60 |
50 |
42 |
60 |
50 |
42 |
50 |
40 |
35 |
50 |
40 |
35 |
50 |
40 |
35 |
40 |
32 |
28 |
40 |
32 |
28 |
40 |
32 |
28 |
*Non-fragile residue includes crops like corn, sorghum, wheat than 1585.8 L [45 bu]).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 1585.8 L [45 bu]), sunflower, peanuts, and cotton.
For machines with 406-mm (16-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
457-mm (18-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point |
102-mm x 368-mm (4-in. x 14.5-in.) shovel |
76-mm x 610-mm (3-in. x 24-in.) shovel |
457-mm (18-in.) sweeps |
51-mm x 356-mm (2-in. x 14-in.) chisel point | 102-mm x 368-mm (4-in. x 14.5-in.) shovel |
76-mm x 610-mm (3-in. x 24-in.) shovel | |
100 |
83 |
73 |
63 |
63 |
55 |
50 |
45 |
45 |
90 |
75 |
68 |
58 |
58 |
50 |
45 |
40 |
40 |
80 |
68 |
59 |
53 |
53 |
45 |
40 |
35 |
35 |
70 |
58 |
53 |
45 |
45 |
38 |
35 |
30 |
30 |
60 |
53 |
45 |
38 |
38 |
33 |
30 |
27 |
27 |
50 |
43 |
38 |
33 |
33 |
27 |
25 |
22 |
22 |
40 |
35 |
31 |
28 |
28 |
22 |
20 |
18 |
18 |
*Non-fragile residue includes crops like corn, sorghum, and wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, and cotton.
Operators are requiring faster field working speeds, larger implements, and tractors because of a dramatic increase in farm size. The market is asking for and receiving tractors with more torque, more weight, and more horsepower.
Accommodating 600 engine horsepower tractors requires more from implement frame and hitch components, including thicker frame tubes, additional diagonal bracing, and frame gussets.
The frame is constructed of continuous 102-mm x 102-mm (4-in. x 4-in.) cross members inserted through 51-mm x 152-mm (2-in. x 6-in.), 76-mm x 152-mm (3-in. x 6-in.), and 102-mm x 152-mm (4-in. x 6-in.) fore-aft members. The mainframe boasts a structure made up of 102-mm x 152-mm (4-in. x 6-in.) fore-aft tubes.
The large frame member sizes, joint welds, and wheel module placement adds to the structural integrity, providing a stable front-to-rear and side-to-side operation.
Frame construction offers:
-
Consistent operating depth
- Level operation
- Restricts frame dip
Walk-Over wheels provide a consistent working depth in uneven ground for level seedbeds and complete weed control.
The staggered wheel design provides extra room for residue flow, obstacles, and transport stability.
A wide variety of tools such as sweeps, chisels, and twisted shovels are available for the operator to maintain surface residue and ground profile under varying weather and soil conditions.
Click here to explore more about points, chisels, and sweeps.
Specs & Compare
Key Specs | Current Model |
Working widths - Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft 3.05 to 5.49 m 10 to 18 ft |
Transport width -Rigid frame | |
Maximum depth | Rigid, TruPosition: max: 20.32 cm 8 in. Spring-reset TruDepth: max: 30.5 cm 12 in. |
Miles per hour | 8 to 11.3 km/h 5 to 7 mph |
Horsepower per foot | 14.7 to 24.5 kW/m 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
Standard spacings - Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
Fold | |
Type | Drawn Rigid, 3-Section Drawn Flex C-Shank, 5-Section Drawn Flex C-Shank |
Working widths | |
Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft |
Drawn rigid fold | Option 1 5.3 to 6.25 m 17.5 to 20.5 ft |
3-section | Option 1 6.65 to 8.5 m 21.83 to 28 ft Mainframe: 3.05 m 10 ft Option 2 7.2 to 11.79 m 23.6 to 38.7 ft Mainframe: 3.66 m 12 ft Option 3 9.35 to 13.1 m 30.67 to 43 ft Mainframe: 4.57 m 15 ft |
5-section | Option 1 13.4 to 16.66 m 44 to 54.67 ft Mainframe: 3.66 m 12 ft Option 2 14.33 to 19.2 m 47 to 63 (15 mainframe) ft Mainframe: 4.57 m 15 ft |
Transport width | |
Rigid frame | Option 1 3.05 to 5.49 m 10 to 18 ft |
Drawn rigid fold | Option 1 3.35 to 4.88 m 11 to 16 ft |
3-section | Option 1 4.67 m 15.33 ft Mainframe: 3.05 m 10 ft Option 2 5.36 m 17.58 ft Mainframe: 3.66 m 12 ft Option 3 6.27 m 20.58 ft Mainframe: 4.57 m 15 ft |
5-section | Option 1 5.26 m 17.25 ft Mainframe: 3.66 m 12 ft Option 2 Mainframe: 6.1 m 20 ft Mainframe: 4.57 m 15 ft |
Transport height | |
Rigid frame | |
Rigid over-center fold | |
3-section | Option 1 3.3 to 4.2 m 10.83 to 13.75 ft Mainframe: 3.05 m 10 ft Option 2 3.28 to 5.05 m 10.75 to 16.58 ft Mainframe: 3.66 m 12 ft Option 3 3.89 to 5.36 m 12.75 to 17.58 ft Mainframe: 4.57 m 15 ft |
5-section | Option 1 4.37 to 4.98 m 14.33 to 16.33 ft Mainframe: 3.66 m 12 ft Option 2 4.4 to 5.3 m 14.42 to 17.42 ft Mainframe: 4.57 m 15 ft |
Operation depth | |
Maximum depth | Rigid, TruPosition: maximum: 20.32 cm 8 in. Spring-reset TruDepth: maximum: 30.5 cm 12 in. |
Operating speed | |
Miles per hour | 8-11.3 km/h 5 to 7 mph |
Horsepower required | |
Horsepower per foot | 14.7 to 24.5 kW/m kW 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
Depth control | |
Option 1 | TruSet Tillage In-cab controls and Single-point crank-adjust |
Option 2 | Single-point crank-adjust |
Option 3 | |
Hydraulic requirements | |
Standard | |
Option 1 | |
Option 2 | |
Electrical requirements | |
Standard | |
Option 1 | |
Option 2 | |
Hitch | |
Description | Floating Tubular T-Hitch: on Rigid and 3-section: 15.2x25.4 cm 6x10 in. On 5-section: 15.2x30.5 cm 6x12 in. |
Frame | |
Tubing | High strength, box beam steel cross tubes: 10.2x10.2 cm 4x4 in. End tubes, patented 4-bar tube-through-tube frame design, welded construction: 5.08x12.7 cm 2x5 in. |
Number of ranks | |
Fore-and-aft | 340.4 cm 134 in. |
Underframe clearance | Rigid and TruPosition: 71.1 cm 28 in. Spring-reset and TruDepth: 81.3 cm 32 in. |
Standard spacings | |
Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
Standard options | |
Option 1 | Spec 3.2x5.08x81.3 cm 1.25x2x32 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Spring-reset |
Option 2 | Spec 3.2x5.08x71.1 cm 1.25x2x28 in. Trip height 25.4 cm 10 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruPosition |
Option 3 | Spec 3.2x5.08x81.3 cm 1.25x2x32 in. Trip height 27.9 cm 11 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruDepth |
Option 4 | |
Ground-engaging components | |
Choices | Variety of sweeps, shovels, and chisel points |
Wheels | |
Centerframe depth control wheels and tires | Option 1 Drawn Rigid: Castering Front and Walk-Over Tandem Rear with (6) IF280/70R15 134D Tires Option 2 3-section: 6.4 to 8.7 m 21 to 28.7 ft Center Frame - 10 ft 3.05 m Castering Front with (2) IF280/70R15 134D Tires and Single Rear with (2) IF 320/70R15 144D Tires on Center Frames Option 3 3-section mainframe of: 6.7 to 10.3 m 22 to 33.67 ft (3.7-m [12-ft] Center Frame) Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frames Option 4 3-section: mainframe: 10.7 to 11.4 m 35 to 37.25 ft (3.7-m [12-ft] Center Frame) 0 through 11.79 m Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frame Option 5 5-section: 13.4 to 16.8 m 44 to 55 ft Castering Front and Walk-over™ Tandem Rear with (6) IF 320/70R15 144D Tires on Center Frames Option 6 5-section: 18.6 m 61 ft Castering Front and Walk-over™ Tandem Rear with (2) IF 320/70R15 144D Tires on Center Frames (4) 285/70R19.5 |
Wing frame wheels and tires | Option 1 3-section: (6) 11L-15FI Load Range D Option 2 5-section: 13.4 to 16.8 m 44 to 55 ft Castering Front with (2) 11L-15FI Load Range D and Walk-over™ Tandem Rear with (4) 12.5L-15FI Load Range F on Inner Wing Frames Castering Front and Walkover Tandem Rear with (6) 11L-15FI Load Range D on Outer Wing Frames Option 3 5-section: 18.6 m 61 ft Castering Front (2) 280/70R15 and Walk-over™ Tandem Rear with (4) 320/70R15 on Inner Wing Frames Castering Front and Walk-over™ Tandem Rear with (6) 280/70R15 on Outer Wing Frames |
Stabilizer wheels | |
No basket harrows | |
Option 1 | |
Option 2 | |
Option 3 | |
Rolling basket harrow | |
Option 1 | |
Option 2 | |
Option 3 | |
Rear hitch | |
Tubing size | Rectangular box construction: 7.62x12.7 cm 3x5 in. |
Telescoping | Yes |
Tongue weight rating | 45.4 kg 100 lb |
GVW | 10,000 |
Wiring harness for transport lights | includes Y-harness, allowing both the 2430 and towed implement lights to work simultaneously |
Hydraulic hoses and couplers | Available as field attachment |
Warranty | |
Description | 3-year frame and standard warranty |
Additional feature | |
Opton 1 | Rear Attachment Options: -Coil-tine Harrow -Hydraulic Knife-edge Rolling Basket |
Option 2 | |
Option 3 | |
Option 4 | |
Option 5 | |
Additional information | |
Date collected |