Overview
There are no easy jobs in the construction and deconstruction business, but when it comes to cutting performance there is one easy choice: the TS 410 STIHL Cutquik cut-off machine with a 12" cutting wheel. Featuring the X2 air filtration system and an anti-vibration system, this cut-off machine is comfortable to use and easy to maintain. Thanks to patented advancements, the TS 410 keeps working longer than the legendary TS 400 helping you stay on schedule. (Abrasive wheel included. Diamond wheel (shown) is sold separately.)
Features
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
Semi-Automatic Belt Tensioning
With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
Bayonet-Style Filler Cap
Includes retainer for easy use, even with gloves on.
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Ergonomic Grip
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Water Connection
Water connection with shut-off valve and quick connector.
Specifications
| MAXIMUM CUTTING DEPTH | 3.9" |
| MAXIMUM SPINDLE SPEED | 5,350 rpm |
| MAXIMUM WHEEL SIZE | 12" |
| ENGINE SPEED | 9,000 rpm |
| ENGINE POWER | 4.4 bhp |
| DISPLACEMENT | 66.7 cc |
| POWER SOURCE | Gas |
| ARBOR SIZE | .79 in. |
| WEIGHT | 20.7 lbs. |
| FUEL CAPACITY | 24 oz. |
