Features
The SB12F Series is a heavy-duty front mount snow blower that reduces operator fatigue and increases productivity while maneuvering tight spaces.
Operators can focus on what’s ahead and reduce snow compaction. The SB12F Series Front Mount Snowblower eliminates the need for an operator to constantly be turned around during snow removal, causing less strain and operator fatigue, especially during long working hours and for less experienced operators. Operators can perform snow removal jobs while focused on what’s ahead, instead of behind them, with a front mounted snowblower.
Improving maneuverability with the subframe hitch, SF12F to sit close to the tractor for easy control in tight spaces. The subframe hitch will mount to both the front and underside of the tractor, providing additional reinforcement to the tractor and for the PTO shaft that carries power from the rear PTO.
The SB12F Series Front Mount Snowblower has a clearing width of 80-inches. Built to handle all types of snow removal, it is ideal for both large residential and commercial jobs.
The in-base skid shoes on the SB12F Series will extend the life of your snowblower by elevating it off the ground to protect the bottom side in tough conditions. Skid shoes are mounted to each side of the snowblower to ensure a smooth cleaning operation.
Skid shoes are both adjustable and replaceable. Adjusting your skid shoes will help to prevent damage, or injury, from thrown debris; and can be easily replaced it they wear out from excessive use.
In-base skid shoes are made of high-carbon steel.
Operators can adjust the chute direction quickly and conveniently from the seat of their tractor, with in-base Hydraulic Chute Rotation. Rotate chute up to 245 degrees to throw snow where desired.
The SB12F Series Snowblower comes standard with a replaceable and reversible cutting edge, made of steel that has the durability needed to scrape the layer of ice underneath the snow.
- Steel provides significant wear life improvement for commercial applications or in abrasive conditions, while protecting the snow blower housing from the snow removal surface.
- Reversible cutting edges provide long-lasting performance and twice the wear life.
- Cutting Edges can be easily unbolted and replaced if worn out from excessive use.
- Tivar Poly Cutting Edge is available as a dealer-installed option.
Control the blowing angle directly from the seat of the tractor with the Hydraulic Chute Deflector Kit, increasing productivity by reducing the operators down-time getting off and on the tractor.
*Requires 3rd Function Loader Controller*
Reduce markings and harsh contact with surfaces by installing the Tivar Cutting Edge Kit.